Unleaded stationary engine w/ 2:1 Reduction wet clutch gearboxMax Power Output: 9hp/3600rpm (Governed to 1800rpm)Displacement: 270ccBore x Stroke (mm): 77 x 58Max Torque (n.m)/rpm] : 18.5/2600Ignition system: Transistor Electric /...

Displacement: 125cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Kick start Compression ratio:...

Length of muffler (body) - approx. 290mm Diameter of mounting hole - approx. 32mm 

Stationary engines such as Mowers, Generators, Water pumps etc.  Honda GX160 / GX200 and Chinese Stationary engines 5.5HP / 6.5HP

Starter motor fit for - 50cc, 70cc, 90cc, 110cc, 125cc 3 Stud Mounting hole distance (side) - approx. 72mm Mounting hole distance (bottom) - approx. 82mm

Complete air filter housing and carburetor mount Foam filter and fittings included Fit for 270cc engines 

 Fit for: GX160 / GX200 Quantity: 1pc (set)

 Fit for: GX240 / GX270 / GX340 / GX390 Quantity: 1pc (Pair)

Fit for: GX160 / GX200 Includes:  1x piston 5x rings 2x circlips 1x pin 7x gaskets 2x crankcase oil seal 1x carburetor Insulator

Quantity: 1pc Fits GX160 / GX200

Quantity: 1pc Fits GX270

Fit for 33, 36, 43, 49, 80cc Distance of nearest mounting holes - 67mm  Distance of across diagonal mounting holes - 95mm 

Quantity:  1PC Replacement application: GX270 Stationary Engine 9HP / 11HP Engines Specify colour at checkout: Black / Red

Displacement: 250cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Forward 1 / Neutral 0 / Forward 2, 3, 4, 5 Clutch type: Wet clutch Cooling system: Air  Ignition Mode: CDI Start Mode: Combo...

Starter motor fit for - GX340, GX390 14 Teeth  

Starter motor fit for - GY6 motors Mounting hole distance - approx. 68mm 9 Tooth